Our newest Qualcomm QCS610 SoM based solution for rugged Smart Cameras

Watch Video Pre-Order Now
close tools

The product configuration you chose is a build-to-order (BTO) option.

Typical lead time for BTO SKU fulfilment is 6-8 weeks. Please contact Inforce computing at

+1-510-683 9999

or send an email to


for accurate pricing and shipping times.

Alternatively, you may choose a standard off-the-shelf configuration for faster shipment lead times.

Smart Wireless Computing
Log In

Log In

Forgot Your Password?

Cart Subtotal: $0.00

Inforce ACC-1H70 21MP MIPI-CSI Camera Module

Availability: Out of stock

facebook twitter Linked In
Qualcomm Snapdragon Logorohs
Inforce ACC-1H70 21MP MIPI-CSI Camera Module
  • Inforce ACC-1H70 21 MP MIPI-CSI Camera Module
  • Inforce ACC-1H70 21 MP MIPI-CSI Camera Module
  • Inforce ACC-1H70 21 MP MIPI-CSI Camera Module
  • Inforce ACC-1H70 21 MP MIPI-CSI Camera Module
  • Inforce ACC-1H70 21 MP MIPI-CSI Camera Module

21 Mega Pixel MIPI-CSI (41-pin) image sensor-based Camera Module board with cable for Snapdragon™ 820 based Inforce platforms.

This next generation camera module accessory is designed with an on-board camera sensor from Sony (IMX230) for Inforce platforms based on the Snapdragon 820 processor. It is a diagonal 21 MP CMOS active pixel type stacked image sensor with a square pixel array. With Exmor-RS™ technology, the ACC-1H70 reaches high speed image capturing and HDR still picture and movies by introducing spatially multiplexed exposure. It operates with three power supply voltages and achieves low power consumption. At full resolution, it offers a readout rate of 24 frames per second, 4k2k@30fps, and 1080p@60fps in both normal and HDR modes.

Designed for Inforce Platforms

  • Inforce 6601 Micro SOM Development Kit

New Key Features

  • Excellent focus on fast-moving subjects
  • High Dynamic Range Imaging
  • 4K video recording
  • White Spot Correction

Block Diagram


block diagram


Camera Adapter Card Features

  • Camera module with a Sony IMX230 image sensor
  • Back-illuminated and stacked type CMOS image sensor with Exmor RS™
  • 21 MP CMOS Image sensor with square pixel array (diag. 7.487mm, Type 1/2.4)
  • CSI-2 serial data output (MIPI 2lane/4lane, max. 1.5 Gbps/lane, DPHY spec. ver. 11)
  • Timing generator, Horizontal / Vertical driver circuits on chip
  • CDS/PGA on chip
  • 10 bit A/D convertor on chip
  • RGB primary color pigment mosaic filters on chip
  • Automatic optical Black clamp circuit on chip
  • High sensitivity, low dark current, no smear, excellent anti-blooming characteristics
  • Variable speed shutter (external mechanical shutter also supported)
  • Pixel rate: 360 MHz (All pixels, 4 lane, 24 frames)
  • 1080p@60, 4K@30 (4096 x 2160) drivers supported
  • Image compensation processing functions like defect pixel correction, ATR and CNR
  • Power-On Reset function
  • Dynamic Defect Pixel Correction
  • Independent flipping and mirroring
  • HDR and tone reproduction in Movie mode
  • Built-in temperature sensor

Camera CMOS image sensor SoC specs

  • Image size: Diagonal 7.487mm (Type 1/2.4)
  • Total number of pixels: 5408 (H) x 4112 (V) approx. 22.24 M pixels
  • Number of effective pixels: 5360 (H) x 4032 (V) approx. 21.61 M pixels
  • Number of active pixels: 5344 (H) x 4016 (V) approx. 21.46 M pixels
  • Unit cell size: 1.12µm (H) x 1.12 µm (V)
  • Sensitivity: 68mV
  • Sensor saturation signal (min value): 338mV
  • Substrate material: Silicon
  • Image Format: Bayer RAW

Power, Mechanical, and Environmental

  • Operating Voltages - Analog 2.5V, Digital 1.1V and 1.8V for input/output interface
  • 38.1 x 30.45 x 1.5mm board size
  • 9 gms weight (with out cable)

Compatible Platforms

  • IFC6640 SBC
  • SYS6601 Devkit



Inforce ACC-1H70 21MP Camera MIPI-CSI Adapter Card Datasheet Download

Additional Info

SKU ACC-1H70-00-P1